A5 specifications

Electrical Specifications

The A5 integrated electronics are designed to connect directly with powered microphone inputs found on most consumer recording devices.

  • Minimum power consumption: 2.4V, 400uA
  • Maximum power consumption: 48V, 10mA

For advanced users, the A5 can also be powered from one leg of phantom power, as used in microphone preamps with XLR input. However, we recommend using the removable XLR adapter for lower noise and true low-impedance, balanced output. 

NOTE: TRRS jacks, typically used for headsets with cell phones and computers, will require an adapter to break out the separate mic and headphone jacks. The A5 will not work directly with AUX or LINE jacks, such as used on marine stereos and powered speakers, as these will not supply plug-in power and do not offer adequate gain.

Mechanical Specifications

  • 17.5mm diameter by 35mm overall length
  • M10 X 1.5 Threaded body with 15mm engagement length
  • Standard cable: CA-53 with 4.5mm OD
  • Max depth: 100 meters

    Acoustic Specifications

    • Sensitivity: -173dBV re: 1uPa
    • Uniform bandwidth 20Hz - 10KHz (+/-4dB)
    • Directivity: Omnidirectional (<20KHz)

    Receive Voltage Sensitivity