Deprecated. Please see the S1n hydrophone, which offers practically identical performance and utilizes the same sensing element.
The AS-1 delivers a wide linear broadband response with a passive sensing element, enabling its use as an omnidirectional projector (transmitter) as well as a receiver. Response is omnidirectional in the human auditory bandwidth, and omnidirectional in the horizontal axis at all frequencies (theoretical). Given these qualities, the AS-1 is well-suited for absolute underwater sound measurements in marine and industrial environments.
The AS-1 is a passive hydrophone with no built-in signal conditioning. Use it directly with your oscilloscope or DAQ device, or pair it with the PA4-BO or PA6 preamp and any digital recorder or sound interface for high-quality, low-cost underwater sound analysis.
Connector
The AS-1 is passive and requires a high-impedance input. Connecting it directly to a low-impedance input (such as a line input or a typical microphone preamp) will result in very low output and poor low-frequency response.
Non-Removable Weight Option
The AS-1 hydrophone can be optionally assembled with our WT150g sliding stainless steel weight assembly for sinking the hydrophone. There are several advantages to placing the weight on the cable rather than building it into the hydrophone:
- When the hydrophone is dropped, the cable flexes and deflects that impact away from the hydrophone.
- It dampens vibrations in the cable that would otherwise be induced into the hydrophone signal as acceleration noise.
Custom cable length
While we can make any length of cable, performance can be impacted above 30-meters. Long cables affect high-frequency response. Consider cable capacitance, input impedance, signal conditioning, and required bandwidth.

