S1 Specifications

S1e - Phantom Power

Uniform Range (+1.2/-3.0 dBV)
4 Hz–110 kHz
Receive Voltage Sensitivity
-180 dBV re: 1µPa
Acoustic Overload Pressure2
188 dB SIL re: 1µPa

S1f - IEPE Power

Uniform Range (+1.2/-3.0 dBV)
4 Hz–108 kHz
Receive Voltage Sensitivity
-180 dBV re: 1µPa
Acoustic Overload Pressure
185 dB SIL re: 1µPa

S1i - Plug-In Power

Uniform Range (+1.2/-3.0 dBV)
19 Hz–108 kHz
Receive Voltage Sensitivity
-187 dBV re: 1µPa
Acoustic Overload Pressure
180 dB SIL re: 1µPa

S1n - Passive

Uniform Range (+1.2/-3.0 dBV)
1 Hz–110 kHz
Receive Voltage Sensitivity1
-206 dBV re: 1µPa
Nominal Capacitance
6.5nF
Transmit Voltage Response
128 dB µPa/V @ 1m
Maximum Input Voltage
50 Vp-p continuous
200 Vp-p 10% duty cycle

1 S1n sensitivity affected by cable length. +/-3.0 dBV passed in QC. Typical variation between units of the same build is less than 2 dBV.
2 with 3V bias with 1.2 mA current.

Shared

Operating Depth Maximum
200 meters
Survival Depth
350 meters
Horizontal Directivity (receive)
+0.2/-1.0 relative dB @ 50kHz
Vertical Directivity (receive)3
+0.0/-5.9 relative dB @ 50kHz
Operating Temperature Range
-10°C to +80°C
Size
Ø12mm x 43mm
Weight in Air
8 grams, hydrophone only
Specific Gravity
1.4, hydrophone only
Wetted Materials
Polyurethane, anodized aluminum

3 Derived from AS-1 hydrophone.

 

Select Plots, see datasheet for additional

Receive Voltage Sensitivity

The receive voltage sensitivity and directional response charts are derived from calibration data provided by the U.S. Navy Underwater Sound Reference Division calibration labs at Newport. S1e, S1f, and S1i performance plots are derived from the S1n response combined with the corresponding amplifier response.


Directional Response

“Horizontal” refers to sound originating from directions perpendicular to the lay of the hydrophone cable. For additional technical detail, see the USRD notes.